FR
Flat-sealing
for metric | PG | NPT | CTG threads
Material: perbunan
Temperature: -20°C ... +120°C
FRH
Flat-sealing
for metric, PG | NPT | CTG threads
especially for protective rate IP 68
and high mechanical stresses
Material: centellen
Temperature: -50°C ... +200°C
OR
O-ring
for metric | PG threads
Material: perbunan
Temperature: -20°C ... +120°C
GM
Counternut
especially for metal threads
metric | PG | NPT | CTG
Material: nickel-plated brass
Temperature: -40°C ... +200°C
GMK
Counternut
especially for plastic threads
metric | PG | NPT | CTG
Material: polyamide, fibre-glass reinforced
Temperature: -40°C ... +100°C
GMK-Duo-M
Counternut separable
especially for connector RQG-Duo-M
Material: PA 6 mod.
Temperature: -40°C ... +110°C ^ +150°C
GME
Counternut EMC
with metric | PG thread
with cutting edges for best contact
Material: nickel-plated brass
Temperature: -40°C ... +200°C
VBM
Fitting sleeve
connection metric to metric inner thread
Material: nickel-plated brass
Temperature: -40°C ... +200°C
WIC
Connecting elbow
inner and outer thread metric | PG
Material: WIC-P zinc die-casting
WIC-M nickel-plated brass
Temperature:
-40°C ... +100°C WIC-M
-20°C ... +100°C WIC-P
REM
Reducer
reduction of a metric | PG thread
to a smaller size
Material: nickel-plated brass
Temperature: -40°C ... +200°C
REK
Reducer
reduction of a metric | PG thread
to a smaller size
Material: polyamide, fibre-glass reinforced
Temperature: -30°C ... +100°C
EWM
Enlargement
extension of a metric | PG thread
into a larger size
Material: nickel-plated brass
Temperature: -40°C ... +200°C
EWK
Enlargement
extension of a metric | PG thread
into a larger size
Material: polyamide, fibre-glass reinforced
Temperature: -30°C ... +100°C
ADM
Adaptor
to combine different types
of threads metric | PG
Material: nickel-plated brass
Temperature: -40°C ... +200°C
ADK
Adaptor
to combine different types
of threads metric | PG
Material: polyamide, fibre-glass reinforced
Temperature: -30°C ... +100°C
STM
Blind plug
for metric | PG threads
Material: nickel-plated brass
Temperature: -40°C ... +200°C
STK
Blind plug
for metric | PG threads
Material: polyamide, fibre-glass reinforced
Temperature: -30°C ... +100°C
Z
Adaptor with strain relief
outer and inner thread metric
application In combination with
all screw connectors
Material: body: nickel-plated brass
sealing: TPE
Temperature: -40°C ... +100°C
Protective rate [acc. to EN 60529]: IP68
KSM
Cable gland
with metric | PG thread
Material: body: nickel-plated brass
sealing: perbunan
Temperature: -20°C ... +100°C ^ +130°C
Protective rate [acc. to EN 60529]: IP68
KSK
Cable gland
with metric | PG thread
Material: body: polyamide
sealing: perbunan
Temperature: -20°C ... +100°C ^ +130°C
Protective rate [acc. to EN 60529]: IP68
DE
Multible Sealing insert
for metric | PG threads
with bore holes for installation
of several single cables
Material: TPE
Temperature: -30°C ... +100°C
DEO
Sealing insert
for metric | PG threads
suitable to bore individual clearance holes
Material: TPE
Temperature range: -30°C ... +100°C
BW
Fastening angle
for metric | PG threads
angle sheet with a through-hole
and two fastening bores
Material: steel, eloc-passivate
Temperature: -40°C ... +200°C
BWK
Connector fastening angle
with metric | PG thread
connection holder with
two fastening bores
Material: plastics [PP]
Temperature: -40°C ... +100°C
SKM
Tubing-Clamp
pipe holder with through hole
for fastening with screws
Material: galvanized steel with rubber-profile
Temperature range: -40°C ... +120°C
Service
Product search
My product catalog (0)